Velodyne Acoustics Impact MKII

Impressive effect guaranteed

The long-throw driver with 2-inch voice coil delivers powerful low frequencies, while a precisely tuned bass reflex port on the bottom makes perfect use of the design. The subwoofers of the Impact MKII series excel in their class thanks to drivers with massive magnets and 2-inch voice coils made of wound copper. These are precisely matched to the MDP amplifier to achieve maximum bass performance from the compact enclosure. In addition, the Impact MKII series offers a sleek, unobtrusive design that blends beautifully into a modern living environment.

The Maximum Dynamic Power (MDP) amplifier from Velodyne Acoustics

is the central element of the Impact MKII series. With its large power reserves, it accurately controls the long-throw drivers of the subwoofers. Their massive 2-inch voice coils, together with the downward radiating bass reflex port provide enormous bass.

The Features

  • MDP amplifier and precisely tuned downward radiating bass reflex port provide maximum output power of the subwoofer.
  • Reinforced, coated drivers made of textile fiber can deflect enormously for the appropriate low-frequency foundation.
  • High-quality components such as the adjustable crossover and massive voice coil ensure long-lasting enjoyment of the subwoofer from Velodyne Acoustics

The 10- and 12-inch Impact Series subwoofers are among Velodyne Acoustics' compact devices,

but they deliver considerable low frequency response in their class and also feature reliable technology.

Driver 10″ forward firing
Amplifier Class D 250 watts dynamic
150 watts RMS power
Frequency Response: (± 3 dB) 32 – 140 Hz
THD < 0.5 % (typical)
Low Pass Crossover 50 Hz to 200 Hz
Phase 0 or 180 degrees
Magnet Structure 5.6 lbs.
Voice Coil 2″ copper wound
Cone Reinforced Coated Fiber
Inputs RCA Line Level, LFE and Speaker Level inputs
Input Impedance 65K ohm (for LINE INPUT jacks), 1.2K ohm (for SPEAKER LEVEL INPUT terminals)
Sensitivity-Line Level 1.0 V
Outputs Left and right speaker level pass-through
Dimensions (H/W/D) (includes feet and grille) 13.6” x 12.6” x 14.9” (34.5 x 32 x 37.8 cm)
Shipping Weight (approx) 30 lbs.
Driver 12″ forward firing
Amplifier Class D 275 watts dynamic
165 watts RMS power
Frequency Response: (± 3 dB) 29 – 140 Hz
THD < 0.5 % (typical)
Low Pass Crossover 50 Hz to 200 Hz
Phase 0 or 180 degrees
Magnet Structure 5.6 lbs.
Voice Coil 2″ copper wound
Cone Reinforced Coated Fiber
Inputs RCA Line Level, LFE and Speaker Level inputs
Input Impedance 65K ohm (for LINE INPUT jacks), 1.2K ohm (for SPEAKER LEVEL INPUT terminals)
Sensitivity-Line Level 1.0 V
Outputs Left and right speaker level pass-through
Dimensions (H/W/D) (includes feet and grille) 15.1” x 14.2” x 18.9” (38.4 x 36 x 48 cm)
Shipping Weight (approx) 38 lbs.

Find a Distributor!

Check location